Causes and Prevention Tips For Mold On Partition Walls

Causes and prevention tips for mold on partition walls. If you have mold on the partition wall, it could be because of a few different causes. Decay can be caused by anything from too much moisture on the partition wall to an insect infestation, which will cause wet rot.

If you’re having this issue with your home’s partition wall, it’ll need to be properly fixed as soon as possible before any more damage is done. This highlights the cause and prevention tips for mold on partition walls:

Common causes of decay on your partition wall

1. Condensation On The Partition Wall Is Causing Mold

If your home has poor ventilation, it can cause condensation to build up on walls and ceilings. Condensation is a form of moisture not caused directly by rain but by water vapor. And when this moisture collects and builds up, it’s prone to turning into a state of mold.

If your home has a ventilation problem, you may notice that it feels warmer inside and has high humidity levels in the air. Your furnace should be working more efficiently. Or maybe your ductwork is too clogged, or they haven’t been cleaned by a professional in some time. If you’re experiencing problems with excess condensation, don’t wait to have it repaired.

Some companies will even offer a particular spray foam insulation type that can help create an airtight seal around your venting system. When paired with your furnace and ductwork, this spray foam can help to reduce the amount of moisture that gets into the ductwork and, ultimately, into your home. This helps to reduce the chances of mold on the partition wall from occurring in the first place.

2. Fungi Can Cause Mold On The Partition Wall

If you’re experiencing mold on the partition wall, there’s a chance that it was caused by fungal growth. Decay can be caused by fungi, which even the smallest amount of moisture can cause. If humidity is building up on the partition wall and nothing is being done to remedy the problem, this mold can proliferate.

A problem with humidity levels in your home could also be causing this kind of mold to grow along with some other types. The best way to have it adequately fixed is to have a professional from a company like us install an air seal in your home.

3. Insects and Rodents Can Cause Mold On The Partition Wall

Rodent and insect infestations can cause mold on partition walls, as well. Rodents like rats and mice are widespread pests in the United States, but they’re also known to cause much damage to homes. Along with chewing through electrical wiring, they can do a lot of damage to your home’s partition walls as well.

Droppings from mice and rats are one source of Stachybotrys chartarum mold, and it could be causing black mold to grow along with other molds in your home. Insects like powder post beetles have also been known to cause a lot of damage to homes. If you’re having this problem with your home, it should be handled as soon as possible.

4. Spotty construction

Mold can also form on a partition wall due to spotty construction, and it can grow on plaster walls after some damage to their structure or because too much moisture made its way into the wall through an old leaky window.

The mold may grow in cracks or holes; it’s also possible for mold to form on the walls if there is any damage to the plaster. Mold can grow in any other partition wall area if the walls are made of wood. Usually, mold cannot grow on wood as it doesn’t have a high moisture content.

5. Water leakage

The first cause of mold on the partition wall is water leakage from another part of the house, creating an area where moisture has accumulated for more than 48 hours. If this is the case, you might have a mold problem in every room on the second floor of your house. The problem may also be caused by concrete walls or foundations that leak water.

How to prevent mold on the partition wall

1.) Make sure the bathroom fan is constantly running

Mold begins to grow when excessive moisture is present in the bathroom for more than three hours; if you don’t want that to happen, run your bathroom fan every time you shower or use the sink at night before bed.

2) Wash and dry your towels every single day

If you leave wet towels on the floor for even one day, mold can begin to grow. If you are unwilling to take this extra step to prevent decay from developing, use towels that dry quickly and hang them up immediately after use.

3) Do not mix fabrics when washing

This includes drying the clothes and combining them in the wash; if you do this, it will lead to a chance of mildew over time. If you want to extend the life of your clothing, then never mix them with other fabrics in the wash.

4) Use a dehumidifier in rooms where there is excessive moisture

If you try to avoid mold on the partition wall, but there is moisture in a bathroom or basement, use a dehumidifier. Be sure to leave it turned on full-time and empty it frequently to prevent mold from developing; do not turn off this device until all traces of moisture have been eliminated.

5) Ventilate laundry rooms as much as possible

Laundry rooms are especially prone to causing mold if they are not kept properly ventilated. Be sure to use fans to keep the air flowing in and out of the room to prevent decay from growing. To prevent corrosion on the partition wall, you must ensure that your laundry room is always well-ventilated and dry.

Causes and Prevention Tips For Mold On Partition Walls – Conclusion

No matter how careful you are, mold can still find a way to invade your home. It will grow in humid bathrooms and kitchens with poor ventilation, but it’s also possible to have a problem with mold on the partition wall for a few specific reasons.